802.11 a/g phase noise - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

wahooburger
 Post subject: 802.11 a/g phase noise
Posted: Mon Feb 05, 2007 6:33 pm 
 
Captain

Joined: Thu Jun 23, 2005 10:47 am
Posts: 6
Hello,

Does anyone know if there is an actual curve/plot/figure showing the official IEEE 802.11a/g phase noise requirements for the oscillator?

Thanks a lot.

Best regards,
Andrew Wu
 
   
 
RFDave
 Post subject:
Posted: Tue Feb 06, 2007 8:52 pm 
 
Captain
User avatar

Joined: Sat Apr 22, 2006 11:14 pm
Posts: 20
I'm not really familiar with 802.11, but I'd be surprised if the phase noise was specified in the 802.11 spec. I think you need to derive that one.

Dave




Posted  11/12/2012