impedance matching methods for 50 to 75 ohm line @ 2.4ghz - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

guest
 Post subject: impedance matching methods for 50 to 75 ohm line @ 2.4ghz
Posted: Sat Mar 26, 2005 1:44 pm 
I would like to use RG6 quadfoil (75 ohm cable) for short runs (~100 ft) to a (50 ohm) roof top circular waveguide antenna for wlan links. Impedance matching one type of transmission line to another using a stub transformer section should be easy. Anyone have an on line source for formulas etc. to build one?




Posted  11/12/2012