Power amplifier design - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.

-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews

-- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

guest
Post subject: Power amplifier design Posted: Mon Oct 31, 2005 4:56 pm
can any one provide a complete procedure of designing a power amplifier for IC at any microwave range or if someone knows a link...basically, i'm looking for a extensive tutorial in PA IC. i've seen many on the web for LNA, mixer, etc but none for PA IC design...thanx

Top

Guest
Post subject: Posted: Tue Nov 01, 2005 9:43 am
Author Steve Cripps has several books on the subject.

Top

Amazon
Post subject: Book listPosted: Tue Nov 01, 2005 10:19 am
Here's a good list.

Top

Jeanalmira
Post subject: Posted: Thu Nov 24, 2005 4:29 am

General

Joined: Tue Mar 15, 2005 11:43 pm
Posts: 65
Location: Singapore
hi :

you may want to check the following books that I found quite extensive in PA IC design :

[1] S.C.Cripps, Advanced Techniques in RF Power Amplifier Design, London: Artech House, 2002.
[2] G.Gonzalez, Microwave Transistor Amplifiers Analysis and Design, New Jersey: Prentice-Hall Inc, 1997, 2nd edition.
[3] L.E.Larson, RF and Microwave Circuit Design for Wireless Communications, Artech House, Inc, 1996.

Hope it helps

Regards,
Jean (EUDA)

Posted 11/12/2012