Limiter design - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

abcdefgxyz
Post subject: Limiter design Posted: Fri Oct 21, 2005 6:14 am
how to find the PIN diodes according to the known fequency? for example, my limiter is designed at 35GHz.


Top

Guest
Post subject: LimiterPosted: Fri Oct 21, 2005 8:35 pm
PIN diode manufacturers publish detailed data sheets for their products. You have to read the data sheets or catalogs, either on-line or on paper, or find a directory or listing.

Most people just check with the device manufacturers - there aren't too many at 35 GHz.

Good Luck!



Posted  11/12/2012