Matlab Question - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

dohagan
 Post subject: Matlab Question
Posted: Thu May 04, 2006 11:52 am 
 
Captain
User avatar

Joined: Sat Mar 19, 2005 3:20 pm
Posts: 5
I want to capture various signals using a digitiser (A/D) sampling card, which is fed from the output of my receiving system. I then want to analyse these signals. For example, I want to correlate different versions of the signal, and perform ambiguity analysis etc. I believe Matlab is the best package for this analysis? My question is: How does one generate the required matrix of input valves (which represents the captured input signal) that Matlab operates on? Effectively I will have the input signal converted to digital, but how then do I take it to Matlab to perform the signal processing?


Many thanks in advance.

RF Burns
 
   
 
karthik
 Post subject:
Posted: Thu May 04, 2006 2:25 pm 
 
Colonel

Joined: Tue Apr 11, 2006 8:13 pm
Posts: 34
Hi

If you have a serial port interface on your A/D, you could use the computer's serial port to acquire data into matlab.

Karthik



Posted  11/12/2012