Antenna ground - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

redhat
 Post subject: Antenna ground
Posted: Fri Jun 03, 2005 8:46 pm 
 
Lieutenant

Joined: Sun May 01, 2005 1:27 pm
Posts: 2
should the antenna ground be connected to the circuit's ground? i saw a microstrip antenna that has only a feed pad but no ground pad .

Regards
 
 
 
snkhan
 Post subject:
Posted: Tue Apr 04, 2006 9:27 am 
 
Lieutenant

Joined: Tue Apr 04, 2006 8:24 am
Posts: 2
In doing simulation there are many ways to do this like ground can also be defined just wiht boundary condition. So its better you explain it.



Posted  11/12/2012