2.4GHz - RF Cafe Forums

The original RF Cafe Forums were shut down in late 2012 due to maintenance issues - primarily having to spend time purging garbage posts from the board. At some point I might start the RF Cafe Forums again if the phpBB software gets better at filtering spam.

Below are the old forum threads, including responses to the original posts.
-- Amateur Radio
-- Anecdotes, Gripes & Humor
-- Antennas
-- CAE, CAD, & Software
-- Circuits & Components
-- Employment & Interviews
 -- Miscellany
-- Swap Shop
-- Systems
-- Test & Measurement
-- Webmaster

lifan
 Post subject: 2.4GHz
Posted: Wed Apr 12, 2006 10:27 pm 
 
Captain

Joined: Fri Feb 10, 2006 1:20 am
Posts: 10
功率16DBM,带宽60MHz,可以做到100M吗?谢谢!

_________________
Friends are all over the world.
 
   
 
nubbage
 Post subject: 2.4GHz etc
Posted: Thu Apr 13, 2006 7:01 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
I wish I could write in Japanese like Iifan
 
   
 
lifan
 Post subject
Posted: Tue Apr 18, 2006 9:35 pm 
 
Captain

Joined: Fri Feb 10, 2006 1:20 am
Posts: 10
No,I write in Chinese .

I mean that the power is 16 dbm,bandwidth is 60 MHz, can I reach 100m?

the RX sensitivity is -82 dbm

_________________
Friends are all over the world.
 
   
 
nubbage
 Post subject: 2.4GHz
Posted: Wed May 10, 2006 2:37 am 
 
General
User avatar

Joined: Fri Feb 17, 2006 12:07 pm
Posts: 218
Location: London UK
I am sorry for the language confusion. I also wish I could write in Mandarin.

The answer to your question is yes, the range is OK even assuming no antenna gain at each end.
The flat fade margin will be about 18dB, but over a 60MHz bandwidth you should expect to see dispersion fading if the reflection point on the ground (or any other object along the path) is visible from both ends.




Posted  11/12/2012